User guide

Before first use

Charge the band fully before wearing it. Slide the silicone part off to expose the connector, then plug it straight into a computer USB port or a standard mains adapter (5 V / 1 A). Avoid high-power fast chargers.

Wearing it properly

Position the band about a finger's width above the wrist bone. It should sit flush against the skin without squeezing: too loose and the temperature reading is off, too tight and it restricts circulation.

Setting the vibrating alarm

The time and the alarm are set directly on the band, with no phone and no app. The exact button combination is in the leaflet inside the box. At the set time, the band vibrates on your wrist: the vibration wakes the wearer silently, so it does not wake the person next to you.

Tracking your temperature

Leave the band on your wrist for a few minutes before reading the measurement, so the sensor can stabilise. Avoid taking a reading right after a shower, physical effort or exposure to cold: the result would be skewed. This data is for general wellness tracking and is not a substitute for medical advice.

Care

Clean the band with a soft, slightly damp cloth, then dry it.
Always dry the connector before plugging it in.
Do not use alcohol, solvents or abrasive products.

Precautions

IP65 rating: resists sweat, rain and splashes, but not immersion. Take it off before showering or swimming.
Do not expose the band to extreme temperatures or to direct sunlight for hours.
Do not try to open the case: this would void the warranty.
If redness or irritation appears, take the band off and let your skin breathe.